Table of Contents
Advertisement
1
1.2
Access
PageScope Light can be accessed directly from a Web browser.
1
Start the Web browser.
2
In the Address bar, enter the IP address of the printer controller as
shown below. Then, press [Enter].
http://<IP address of the printer controller>/
(Example) When the IP address of the printer controller is
192.168.0.10:
http://192.168.0.10/
3
The PageScope Light screen appears.
NOTE
If your Web browser is set to use a proxy server, it may not be able to
connect to PageScope Light. In this case, specify the IP address of the
printer controller as an exception for access through the proxy server.
(Example) With Internet Explorer 5
è
Click "Tools" in the menu bar, and then click "Internet Options...".
è
Click the [Connections] tab.
è
Click the [LAN Settings] button.
è
Click the [Advanced] button in the "Proxy server" group box.
è
Type the IP address of the printer controller into the "Exceptions" list
box.
Operation
PageScope Light operation is identical to that for Internet Web pages.
You can click a link on the Web page to jump to the link destination or
click the [Back] or [Forward] button to display the previous or next page.
1-2
Using PageScope Light
CN3102Pro
Advertisement
Table of Contents
