Using the Scanner Mode
2.2
Controller Setup Items
The following settings must be made on the controller side to use the
scan function.
Network Protocol Settings
Network communications using the TCP/IP protocol must be possible.
Use the [Setup Mode] on the controller operation to enter the settings.
For details on the setup items and procedure, see the Controller User
Manual.
Scan Settings
Use the [Setup Mode] on the controller operation panel to enter the
settings.
Controller
Operation Panel
Setup Mode: [Network Setup] — [Service Setup] — [E-Mail Setup]
Enable E-mail Services
Enable Print Via E-mail
Outgoing Server
Incoming Server
Server Type
Fiery Email User Name
Fiery Email Domain Name
Account Name
Password
Administrator Email User Name
Administrator Email Domain Name
Timeout (Sec)
Polling Interval
Maximum Scan File Size
* ×: required
* 1: The From address is Fiery Email User Name@Fiery Email Domain Name. Normally, the e-
mail address of the controller is specified. (See p. 2-11.)
* 2: Administrator Email User Name@Administrator Email Domain Name is the error
notification destination if the mail does not reach the recipient for some reason. (See p.
2-11.) However, if the mail is not transmitted, the error is not notified.
CN3102Pro
Scan to E-mail
Scan to Mailbox
×
—
—
—
×
—
—
—
—
—
1
×*
—
1
×*
—
—
—
—
—
2
×*
—
2
×*
—
×
—
—
—
×
—
2
2-5