Setting The From Address - Minolta CN3102Pro User Manual

2
2.6

Setting the From Address

You can carry out the following steps to specify the mail address that
appears in the sender (From) line of the mail transmitted by Scan to E-
mail.
1
Show the setup screen from the controller operation panel.
2
Select [Network Setup] — [Service Setup] — [E-Mail Setup] and enter
the following settings.
m [Fiery Email User Name]:
Specify the mail user name of the sender.
m [Fiery Email Domain Name]:
Specify the mail server domain name to which the sender
belongs.
NOTE
è The From address is Fiery Email User Name@Fiery Email Domain
Name. Normally, the e-mail address of the controller is specified.
2-12
Using the Scanner Mode
CN3102Pro