Quickly Locating A Scene Using The Zero Set Memory Function; Trv140 Only - Sony DCR-TRV140 Operating Instructions Manual

Quickly locating a scene using the zero
set memory function
– DCR-TRV140 only
Your camcorder goes forward or backward to automatically stop at a desired scene
having a counter value of "0:00:00".
Use the Remote Commander for this operation.
Use this function, for example, to view a desired scene later on during playback.
(1) In the playback mode, press DISPLAY.
(2) Press ZERO SET MEMORY on the Remote Commander at the point you want
to locate later. The counter shows "0:00:00" and the ZERO SET MEMORY
indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the counter's zero point. The tape stops
automatically when the counter reaches approximately zero. The ZERO SET
MEMORY indicator disappears and the time code appears.
(5) Press N. Playback starts from the counter's zero point.
ZERO SET MEMORY
Notes
•When you press ZERO SET MEMORY on the Remote Commander before rewinding
the tape, the zero set memory function is canceled.
•There may be a discrepancy of several seconds from the time code.
If a tape has a blank portion in the recorded portions
The zero set memory function may not work correctly.
The zero set memory function also in the standby mode
When you insert a scene in the middle of a recorded tape, press ZERO SET MEMORY at
the point you want to end the insertion. Rewind the tape to the insert start point, and
start recording. Recording stops automatically at the tape counter zero point. Your
camcorder returns to the standby mode.
DISPLAY
DISPLAY
67