Sony DCR-TRV140 Operating Instructions Manual page 109

Changing the menu settings
Icon/item Mode
LCD BRIGHT
LCD B. L. z BRT NORMAL
LCD COLOR
VF B.L.* 3)
z BRT NORMAL
Notes on VF B.L.*
•When you select BRIGHT, battery life is reduced by about 10 percent during
recording.
•When you use power sources other than the battery pack, BRIGHT is automatically
selected.
1)
* DCR-TRV140 only
* 2) CCD-TRV107/TRV108/TRV308/TRV408/TRV608 only
3)
* CCD-TRV107/TRV308/TRV408/TRV608, DCR-TRV140 only
4)
* CCD-TRV107/TRV308/TRV408/TRV608 only
Icon/item Mode
REC MODE
z SP
AUDIO MODE* 1) z 12BIT
ORC TO SET* 2)
ORC stands for "Optimizing the Recording Condition."
Meaning
—–– To adjust the brightness on the LCD screen with
the SEL/PUSH EXEC dial to adjust the following
bar.
To darken
To set the brightness on the LCD screen normal.
BRIGHT To brighten the LCD screen.
—–– To adjust the color on the LCD screen, turn the
SEL/PUSH EXEC dial to adjust the following bar.
To reduce
intensity
To set the brightness on the viewfinder screen
normal.
BRIGHT To brighten the viewfinder screen.
3) and LCD B.L.
Meaning
To record in the SP (Standard Play) mode.
LP To increase the recording time to 1.5 times*
twice* 2)
To record in the 12-bit mode (two stereo
sounds).
16BIT To record in the 16-bit mode (the one stereo
sound with high quality).
—–– To automatically adjust the recording condition
to get the best possible recording. Press
START/STOP to start adjustment. Your
camcorder takes about 10 seconds to check the
tape condition and then returns to the standby
mode.
the SP mode.
POWER
switch
VCR* 1) /
PLAYER*
CAMERA
To lighten
VCR* 1) /
PLAYER*
CAMERA
VCR* 1) /
PLAYER*
CAMERA
To increase
intensity
1)
VCR* /
PLAYER*
CAMERA
POWER
switch
CAMERA
1)
/
CAMERA
CAMERA
2)
2)
2)
4)
109