Cisco UCS 5100 Setup page 8

4.1 Assign VSAN to FC Uplink Port in Fabric Interconnect
Now assign the VSAN you just created to the FC Uplink port in your Fabric Interconnect that has a direct link
to your SAN network. Complete these steps:
1. In the Navigation pane, choose the Equipment tab.
2. Choose Fabric Interconnect A > Expansion Module #.
3. Choose Uplink FC Ports and choose the FC Port 1 that has a connection to the upstream SAN
switch.
4. In the Work pane to the right in VSAN, choose the VSAN you just created from the drop−down
menu.
5. Click Save Changes.
Repeat the same process to assign this VSAN to all the designated FC Up link ports that remain on
this same Fabric Interconnect.