Cisco UCS 5100 Setup page 11
Fcoe connectivity
Hide thumbs
Also See for UCS 5100:
- Firmware manual (10 pages) ,
- Upgrade instructions (10 pages) ,
- Quick start manual (8 pages)
Advertisement
7.
Click Save Changes.
8.
Repeat the same process for all other FC ports in Fabric A and Fabric B.
5. Create vHBA within Server Profiles
Create two network adapters in a Service Profile to grant the Operating System access to the two SAN fabrics
provisioned in previous steps.
1.
In the Navigation pane, choose the Server tab.
2.
Under Service Profiles, choose root.
3.
In the work pane to the right, click Create Service Profile (expert).
Advertisement
