Advertisement
8
3/8"
(10mm)
ENG OPTIONAL
To increase tension and maintain degree of tilt,
tighten screw (x) on each adapter bracket. If more
tension is needed, tighten screws (y) on each
adapter bracket.
Note: Tilt may not be fully supported
for all displays
Do not remove screw or loosen screw until it is
ENG
no longer engaged with the mount. Doing so may
cause the display to fall.
9
ENG Removing display.
ENG Lock/unlock latch
y
11
2014-01-08 #:125-9484-6 (2017-04-06)
y
x
Advertisement
