Raising And Lowering The Presser Foot; Changing The Presser Foot - Janome Sewist 725s Instruction Book

e
w
q
w
e
w
q
e
7

Raising and Lowering the Presser Foot

The presser foot lifter raises and lowers the
presser foot.
You can raise the foot about 1/4˝ (0.6 cm) higher
than the normal up position for easy removal
of the presser foot, or to help you place heavy
fabric under the foot.
q Lowered position
w Normal up position
e Extra up position

Changing the Presser Foot

To remove:
Raise the needle to its highest position by
turning the handwheel counterclockwise. Raise
the presser foot, and press the lever on the back
of the foot holder.
q Lever
CAUTION:
Turn OFF the power switch before changing
the foot.
Always use the proper foot for the selected
pattern.
The wrong foot can cause the needle to
break.
Do not push the lever down to prevent it from
being broken.
To attach:
Place the desired presser foot, so that the pin
on the foot lies just under the groove on the foot
holder. Lower the presser foot lifter to lock the
foot in place.
w Groove
e Pin