Adjusting Stretch Stitch Balance; Stitch Width Adjusting Dial; Variable Needle Position - Janome Sewist 725s Instruction Book

"–"
"+"
q
w

Adjusting stretch stitch balance

If the stretch stitch patterns are uneven when
you sew on a particular fabric, correct them by
turning the stitch length dial.
If the pattern is drawn out, correct them by
setting the dial to the "–" side.
If the pattern is compressed, correct them by
setting the dial to the "+" side.

Stitch Width Adjusting Dial

Turn the stitch width dial to set the desired stitch
width number at the setting mark.
The higher the number, the wider the stitch
q Stitch width dial
w Setting mark
CAUTION:
Do not turn the stitch width adjusting dial
while the needle is in the fabric, otherwise
the needle may bend or break.

Variable needle position

The needle drop position of the straight stitches
can be adjusted between the center (5) and left
(0) with the stitch width dial.
17