— Playback – Basics —
Playing back a tape
You can monitor a tape recording on the LCD screen. If you close the LCD panel, you
can monitor the playback picture in the viewfinder. You can also control playback using
the Remote Commander supplied with your camcorder.
(1) Set the POWER switch to VCR while pressing the small green button.
(2) Press OPEN to open the LCD panel.
(3) Press
(4) Press
(5) Adjust the volume following the steps below.
1 Press FN to display PAGE1.
2 Press VOL. The screen to adjust volume appears.
3 Press – (to turn down the volume)/+ (to turn up the volume).
4 Press
3
2
42
to rewind the tape.
to start playback.
OK to return to PAGE1.
4
1
POWER
LOCK
5
VOL
The bar indicator
OK