Inserting A Scene From A Vcr - Insert Editing - Sony Handycam DCR-PC105 Operating Instructions Manual

Inserting a scene from a VCR
– Insert editing
You can insert a new scene with sound from a VCR onto your originally recorded tape
by specifying the insert start and end points. Use the Remote Commander for this
operation.
Connections and preparations are the same as on page 97 and 98. Insert a cassette
containing the desired scene to insert into the VCR.
[A] The tape that contains the scene to be superimposed
[B] The tape before editing
[C] The tape after editing
The POWER switch should be set to
Operate by touching the panel.
(1) On the VCR, locate just before the insert start point [a], then set the VCR to
playback pause.
(2) On your camcorder, locate the insert end point [c], then set it to playback
pause.
(3) Press ZERO SET MEMORY on the Remote Commander. The ZERO SET
MEMORY indicator flashes and the end point of the insert is stored in
memory. The tape counter shows "0:00:00."
100
[A]
[B]
[C]
[a]
[b] [c]
.