Sony Handycam DCR-PC105 Operating Instructions Manual page 54

Adjusting the white balance manually
If the picture is being taken in a studio lit by TV lighting
We recommend that you record in the INDOOR mode.
If you record under fluorescent lighting
Select AUTO or HOLD.
Your camcorder may not adjust the white balance correctly in the INDOOR mode.
If you did the following in the AUTO mode:
– You remove the battery pack for replacement.
– You bring your camcorder from indoors to outdoors holding the exposure, or vice
versa.
Point your camcorder at the white subject for about 10 seconds after setting the POWER
switch to CAMERA to get better adjustment.
If you did the following in the HOLD mode:
– You change the mode of PROGRAM AE.
– You bring your camcorder from indoors to outdoors, or vice versa.
Set WHT BAL to AUTO and reset to HOLD after a few seconds.
54