Sony Handycam DCR-PC108 Operation Manual page 82

TITL ERASE
TITLE DISP
82
Using the Menu
4 When you have finished entering characters, touch
2
Touch .
3
Touch (color),
desired color, position or size.
Color
white t yellow t violet t red t cyan t green t blue
Position
You can select from 8 to 9 choices.
Size
small y large
(You can only select the small size when you are entering more than 13
characters.)
4
Touch .
5
Touch [SAVE].
During playback, playback pause, or recording
[TITLE SAVE] is displayed on the screen for about 5 seconds and the title is
set.
During recording standby
[TITLE] appears. When you press REC START/STOP to start recording,
[TITLE SAVE] is displayed on the screen for about 5 seconds, and the title is
set.
Notes
b
• The point you superimposed the title may be detected as an index signal when searching a
recording with other video device.
• When you are using your camcorder on the battery pack and do not operate it for 5 minutes,
the power automatically goes off as the default setting. If you may take 5 minutes or longer
to enter characters, set [A.SHUT OFF] on the
[NEVER] (p. 88). The power will not be turned off. Even though the power goes off, the
characters you have entered remain stored in memory. Turn the power back on, then start
again from step 1 to continue superimposing the title.
Tip
z
• To change a created title, select the title in step 1, then touch
characters again.
1
Select the title that you want to delete using
2
Confirm the title is the one you want to erase, then touch
To cancel the operation, touch [NO].
3
.
Touch
You can view the title when you play back the picture.
GON
Select to display the title when a scene superimposed with a title
appears.
OFF
Select when you do not want to display the title.
/ (position), [SIZE] as necessary to select a
(STANDARD SET) menu to
.
. Then, reselect the
/ , then touch .
[YES]
.