Start Recording While Checking The Subject On The Lcd Screen; View The Recorded Picture On The Lcd Screen - Sony Handycam DCR-PC108 Operation Manual

3

Start recording while checking the subject on the LCD screen.

The date and time is not set up in the default setting. To set the date and time, see page 22.
a
Set the LENS COVER
switch to OPEN.
b
Open the LCD panel.
c
While pressing the
green button, slide
the POWER switch
down to light up the
CAMERA-TAPE lamp.
The power turns on.
d
Press REC START/
STOP.
Recording starts. To
change to standby mode,
press REC START/STOP
again.
You can also use REC
START/STOP of the LCD
panel.
4

View the recorded picture on the LCD screen.

a
Slide the POWER
switch repeatedly
until the PLAY/EDIT
lamp lights up.
b
Touch
c
Touch
start the playback.
To stop, press
To turn off the power, slide the
POWER switch up to OFF
(CHG).
Set the LENS COVER switch
to CLOSE.
(rewind).
(play) to
.
11
Quick Start Guide