Sony Handycam DCR-PC108 Operation Manual page 103

6
Touch the desired item.
When you are recording on a tape in
the VCR
Touch [OTHER DEVICE].
PROG. EDIT 0:00:00:00
MARK EDIT
START UNDO
IN SET
TOTAL 0:00:00:00
SCENE 0
END
When you are recording on a
"Memory Stick Duo"
1
Touch [MEMORY STICK].
PROG. EDIT 0:00:00:00
MARK IMAGE
START UNDO
IN SIZE
2min
TOTAL 0:00:00
SCENE 0
END
2
Touch [IMAGE SIZE] repeatedly to
select the desired image size.
7
Search for the beginning of the first
scene that you want to dub on your
camcorder, then pause playback.
You can adjust the position with
(frame).
8
Touch [MARK IN].
The starting point of the first program is set,
and the upper part of the program mark
changes to light blue.
[IMAGE SIZE] appears when recording
on a "Memory Stick Duo."
PROG. EDIT 0:00:00:00
MARK EDIT
START UNDO
OUT SET
TOTAL 0:00:00:00
SCENE 0
END
9
Search for the end of the first scene
that you want to record on your
camcorder, then pause playback.
You can adjust the position with
(frame).
10
Touch [MARK OUT].
The ending point of the first program is set,
and the lower part of the program mark
changes to light blue.
PROG. EDIT
MARK
START
IN
TOTAL 0:00:00:12
SCENE 1
11
Repeat steps 7 to 10 and create
programs.
12
Set your VCR to recording pause.
Skip this step if your camcorder is
connected via an i.LINK cable or recording
on a "Memory Stick Duo."
13
Touch [START].
START
ENGAGE
CANCEL
REC PAUSE
TOTAL 0:00:00:25
SCENE 3
/
14
Touch [EXEC].
A search for the beginning of the first
program starts, then the recording starts.
[SEARCH] appears during the search and
[EDITING] appears during editing.
SEARCH
SCENE 1/3
CANCEL
When a program is recorded, the program
mark changes from orange to light blue.
When all programs have been recorded, the
program editing operation stops
automatically.
To cancel recording, touch [CANCEL].
/
0:00:00:00
EDIT
UNDO
SET
END
0:00:00:00
EXEC
–x 1
0:00:00:00
END
,continued
Dubbing/Editing
103