Recording A Still Image - Sony Handycam DCR-PC108 Operation Manual

3
Slide the POWER switch until the
CAMERA-TAPE lamp lights up.
4
Press EASY.
The EASY lights up in blue.
Easy Handycam
operation
ON
5
Press REC START/STOP.
Recording starts. [REC] appears on the
LCD screen and the Camera recording lamp
lights up. Press REC START/STOP again
to stop recording.
To turn the power off
1
Slide the POWER switch up to the OFF
(CHG) position.
2
Set the LENS COVER switch to CLOSE.
To cancel Easy Handycam operation
Press EASY again.
b Notes
• You cannot turn Easy Handycam operation on or off
during:
– Recording
– USB Streaming
• During Easy Handycam operation, the following
buttons are not available:
– LCD BACKLIGHT (p. 21)
– BACK LIGHT (p. 38)
• During Easy Handycam operation, the settings of the
functions that are not displayed on the screen return
to their defaults. Previously made settings are
restored when you cancel Easy Handycam
operation.
36
Recording
Slide the POWER
switch while
pressing the green
button.

Recording a still image

1
Set the LENS COVER switch to OPEN.
2
Open the LCD panel.
3
Slide the POWER switch repeatedly
until the CAMERA-MEM lamp lights
up.
4
Press EASY.
The EASY lights up in blue.
5
Press and hold PHOTO lightly.
You will hear a light beeping sound when
the focus and brightness settings are
adjusted. Recording does not start at this
point.
6
Press PHOTO fully.
A shutter sound is heard. When bars of
disappear, the image is recorded on
the "Memory Stick Duo."
To turn the power off
1
Slide the POWER switch up to the OFF
(CHG) position.
2
Set the LENS COVER switch to CLOSE.
To cancel Easy Handycam operation
Press EASY again.
Slide the
POWER switch
while pressing
the green button.