Playing The Picture On A Tv - Sony Handycam DCR-HC90 Operating Manual

Playing the picture on a TV

Connect your camcorder to the wall outlet using the supplied AC Adaptor for this operation
(p. 10). Refer also to the instruction manuals supplied with the devices to be connected.
A/V jack
A/V
: Signal flow
A/V connecting cable (supplied)

Connect to the input jack of the other device.
A/V connecting cable with S

VIDEO (optional)
When connecting to another device via the
S VIDEO jack, by using the A/V connecting
cable with an S VIDEO cable (optional),
pictures can be reproduced more faithfully
than with the supplied A/V cable connection.
Connect the white and red plugs (left/right
audio) and S VIDEO plug (S VIDEO
channel) of an A/V connecting cable
(optional). In this case, the yellow (standard
video) plug connection is not necessary. S
VIDEO connection only will not output
audio.
When your TV is connected to a VCR
Connect your camcorder to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE.
34
1
(Yellow) (White)
2
To set the aspect ratio according to
the connected TV (16:9/4:3)
Change the setting according to the screen
size of the TV you will view pictures on.

Slide the POWER switch down to turn on
the PLAY/EDIT lamp.
Touch 

(STANDARD SET)  [TV TYPE] 
[16:9] or [4:3] 
• When you connect your camcorder to a TV
compatible with the ID-1/ID-2 system, or via
an S VIDEO jack, and play back the tape, set
[TV TYPE] to [16:9]. The TV automatically
switches the aspect ratio according to the
playback picture.
Refer also to the manual supplied with your TV.
• When you set [TV TYPE] to [4:3], or when the
picture's aspect ratio switches between 16:9 and
4:3, the image may jitter.
• On some 4:3 TVs, the still image recorded in
4:3 aspect ratio may not appear in full screen.
This is not a malfunction.
(Red)
VCRs or TVs
 [MENU] 
.