Table 16 Common Config (0X11000) - Mediatek Labs LinkIt Connect 7681 Developer's Manual

The layout for the Common Config region in Flash is shown in Table 16. These items are:
•
loaded when MT7681 calls load_com_cfg().
•
reset by calling reset_com_cfg().
Offset Section
0x18000 Common Info Stored Flag
0x18001 Boot Firmware Index:
(0=station mode 1=AP mode
0x18002 Firmware Update Status
0x18003 I/O Mode select
0x18004 Reserved 1
0x18018 UART Baud rate
0x1801C UART Data bits
0x1801D UART Parity bits
0x1801E UART Stop bits
0x1801F Reserved 2
0x18033 TCP/UDP, Server/Client Select (Bitmap)
0x18034 TCP Server Port (2Bytes)
0x18036 TCP Client Port (2Bytes)
0x18038 UDP Server Port (2Bytes)
0x1803A UDP Client Port (2Bytes)
0x1803C IP Type select (0:Static / 1: Dynamic)
0x1803D Static IP
0x18041 Subnet Mask (4 Bytes)
0x18045 DNS Server IP (4 Bytes)
0x18049 Gateway IP (4 Bytes)
0x1804D IoT Server IP (4 Bytes)
0x18051 IoT Sever Domain Name (128 Bytes)
0x180D1 Reserved 3
0x180E5 Cmd_Password (4 Byte)
0x180E9 Reserved 4
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
MediaTek LinkIt™ Connect 7681 Developer's Guide
2=Recovery mode)

Table 16 Common Config (0x11000)

© 2015, 2016 MediaTek Inc.
Size DEC
(Byte) Offset
1 0
1 1
1 2
1 3
20 4
4 24
1 28
1 29
1 30
20 31
1 51
2 52
2 54
2 56
2 58
1 60
4 61
4 65
4 69
4 73
4 77
128 81
20 209
4 229
x 233
Page 63 of 65