Table 8 Content Of The Customizable Folder - Mediatek Labs LinkIt Connect 7681 Developer's Manual

File
rtmp_data_pub.c
wifi_task_pub.c
spi-flash_pub.c
misc_pub.c
mt7681_ChSw_pub.c
stdlib.c
printf.c
ap_pub.c
tcpip\*.c
4.2.3. Header files
Header files are stored in the /src folder in files with the format libandesxxx.a.
4.2.4. Build settings folder
Build configuration setting files are stored in the /mak/MT7681 folder and include the files shown
in Table 9.
File
compiler.mk
flags_ap.mk
flags_sta.mk
flags_recovery.mk
4.2.5. Object folder
Generated object code from the compiler is stored in the /obj folder.
4.2.6. Output folder
The final binaries generated by the compiler are stored in the /out folder. For example, the
station mode firmware is located at /out/sta/MT7681_sta_header.bin. For more information,
see section 3.1, "make".
4.2.7. Reference firmware binaries folder
Reference firmware binaries, guarantee to work original firmware binaries, are stored in the
/refbin folder.
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
MediaTek LinkIt™ Connect 7681 Developer's Guide
Purpose
Wi-Fi Rx packet handler
Wi-Fi Task function
Implementation for serial flash reading and writing
Implementation for delay functions
Implementation for setting Wi-Fi channels
Implementation for malloc(), free() and atoi()
Implementation for log function: printf_high()
AP mode configuration initialization and PMK setting
Source files and sample code for TCP/UDP

Table 8 Content of the customizable folder

Purpose
Tool chain directory configuration
Configuration for AP mode
Configuration for Station mode
Configuration for Recovery mode
Table 9 The build configuration settings files
© 2015, 2016 MediaTek Inc. Page 26 of 65