Table of Contents
Advertisement
Setting the specific Flash layout for XIP region (60KB or 164KB) is done in the Makefile, as follows:
# After changing FLASH_XIP_164,
# It is must compile all Firmwares (Recovery, STA, AP)
# Then upgrade loader, recovery, ap, sta firmwares in order by uart,
# or upgrade MT7681_all.bin / MT7681_all_xip164.bin by Flash writer
FLASH_XIP_164
=
ifeq
($(FLASH_XIP_164),1)
XIPSIZE
=
endif
ifeq
($(FLASH_XIP_164),1)
FUNCFLAGS
+=
-DFLASH_XIP_164_SUPPORT=1
endif
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
0
_xip164
© 2015, 2016 MediaTek Inc.
MediaTek LinkIt™ Connect 7681 Developer's Guide
Page 60 of 65
Advertisement
Table of Contents
