Table of Contents
Advertisement
PC) can connect to it, and it can create TCP/UDP connection with other devices in the LAN
or WLAN
4.3.2.
UART log at Boot up stage
During the boot sequence a log is written to UART, this is an example of the log for Station mode:
==> Recovery Mode
<== Recovery Mode
(-)
SM=0, Sub=0
SM=1, Sub=0
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
MediaTek LinkIt™ Connect 7681 Developer's Guide
Figure 20 The boot sequence of MT7681
/*start to running recovery/Calibration image*/
/* end to running recovery/Calibration image*/
/*start to running station image*/
© 2015, 2016 MediaTek Inc.
Page 28 of 65
Advertisement
Table of Contents
