www.normet.fi
HF 160
PRESENTATION
3.INTRODUCTION
3.1. FIELD OF APPLICATION
Feeding difficult material becomes easier and
more effective when using the hydraulic feeder
and feed chute HF160. Also the chip quality
improves due to constant feeding speed and is
less dependent on knife sharpness.
The HF160 can be driven by the tractor
hydraulics or the independent hydraulic unit
HD11 (accessory).
You can easily replace a mechanical feed chute
or a drop spout with the HF160 feeder and feed
chute.
7.
Fig. 1.
HF160 main components.
03512800
4.MAIN COMPONENTS
1. Safety / control bar
2. Control valve
3. Flow regulator
4. Hydraulic motor
5. Feed roller
6. Frame
7. Feed chute
8. Pawl lever
1.
2.
3.
8.
--- 9 ---
5.
4.
6.