www.normet.fi
HF 160
ASSEMBLY AND MOUNTING
INSTRUCTIONS
Fig. 4.
2. Fasten the feed chute to the feeder frame
with two hinge bolts (M8x110 bolt s and M8
lock nuts) and lock it into working position,
fig.5.
Fig. 5.
03512800
3. Fasten the control rod to the safety / control
bar, refer to Spare parts, page 3
4. Connect the hydraulic hoses by connecting
the pressure hose (marked "IN") to the hy-
draulics of the tractor. Then connect the re-
turn hose (marked "OUT") either to the re-
turn hose hook ---up of the double---acting
hydraulic valve or, in a single acting system,
directly to the oil reservoir. We recommend
an oil filter in the return line, fig.6.
T
Fig. 6.
Connecting the hydraulics.
--- 12 ---
P
E
T