Dubbing Selected Scenes From A Tape; Digital Program Editing; ( Trv280) - Sony CCD-TRV338 Camera Operation Manual

Dubbing selected
scenes from a tape
– Digital program editing ( TRV280)
You can select up to 20 scenes (programs)
and record them in the desired order to other
recording device such as VCR.
Delete unwanted scene
Change the order
Results of editing
Step 1: Preparing your camcorder
and VCR for operation
Follow the steps below when you are
performing digital program editing for the
first time to a tape in a VCR. You can skip
this setting if you have set up the VCR by the
following procedure before.
b Notes
• You cannot perform the Digital program editing on
the following devices:
– a VCR that does not support [IR SETUP] codes
– a DVD recorder, a DVD recorder equipped with an
HDD, etc
• When your camcorder is connected to the VCR via
the DV Interface, you cannot record the title or
indicators.
1
Connect your VCR to the camcorder
as a recording device (p. 60).
You can use either the A/V connecting
cable or the i.LINK cable to make the
connection. The dubbing procedure is
easier with the i.LINK connection.
2
Prepare your VCR.
• Insert a cassette for recording.
• Set the input selector to input mode, if
your VCR has one.
3
Prepare your camcorder (playing
device).
• Insert a cassette for editing.
• Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
4
Press MENU.
5
Turn the SEL/PUSH EXEC dial to
select (OTHERS), then press the
dial.
6
Turn the SEL/PUSH EXEC dial to
select [VIDEO EDIT], then press the
dial.
0 : 08 : 55 : 06
VIDEO EDIT
MARK 1 IN
UNDO
ERASE ALL
START
EDIT SET
TOTAL 0 : 00 : 00 : 00
SCENE 0
[ MENU ] : END
7
Turn the SEL/PUSH EXEC dial to
select [EDIT SET], then press the dial.
0 : 08 : 55 : 06
VIDEO EDIT
EDIT SET
CONTROL IR
ADJ TEST
"CUT–IN"
"CUT–OUT"
IR SETUP
PAUSEMODE
IR TEST
RETURN
[ MENU ] : END
8
Turn the SEL/PUSH EXEC dial to
select [CONTROL], then press the
dial.
0 : 08 : 55 : 06
VIDEO EDIT
EDIT SET
CONTROL IR
i. LINK
[ MENU ] : END
,continued
67
Dubbing/Editing