Dubbing Selected Scenes From A Tape; Digital Program Editing - Sony Handycam DCR-HC30 Operation Manual

10
Touch , then
b Notes
• You cannot dub the index screen.
• You may not be able to dub images modified on your
computer or recorded with other camcorders on your
camcorder.
• You cannot dub MPEG movies on the tape.
.
Dubbing selected
scenes from a tape

– Digital program editing

You can select up to 20 scenes (programs)
and record them in the desired order to other
recording device such as VCRs or to a
"Memory Stick Duo" inserted in your
camcorder.
When you are recording on a "Memory Stick
Duo," skip steps 1 and 2 and start from
"Recording the selected scenes as programs"
(p. 101).
Delete unwanted scene
Change the order
Results of editing
Step 1 : Preparing your
camcorder and VCR for operation
Follow the steps below when you are
performing a digital program edit for the first
time to a tape in a VCR. You can skip this
setting if you have set up the VCR by the
following procedure before.
b Notes
• You cannot perform the Digital program editing on
a VCR that does not support [IR SETUP] codes.
• The operating signal for the Digital program editing
cannot be transferred via the LANC jack.
1
Connect your VCR to the camcorder
as a recording device (p. 92).
You can use either the A/V connecting
cable or the i.LINK cable to make the
,continued
97
Dubbing/Editing