Step 5: Setting The Date And Time - Sony Handycam CCD-TRV228E Operation Manual

Step 5: Setting the
date and time
Set the date and time when using this
camcorder for the first time. If you do not set
the date and time, the [CLOCK SET] screen
appears every time you turn on your
camcorder.
b Note
• If you do not use your camcorder for about 3
months, the built-in rechargeable button-type
battery gets discharged and the date and time
settings may be cleared from the memory. In that
case, charge the rechargeable button-type battery
(p. 86) and then set the date and time again.
OPEN SEL/PUSH
EXEC dial
1
Turn on your camcorder (p. 15).
2
Press OPEN and open the LCD panel.
Proceed to step 6 when you set the clock for
the first time.
MENU
POWER
switch
3
Press MENU.
MANUAL SET STBY
PROGRAM AE
P EFFECT
AUTO SHTR
[ MENU ] : END
4
Turn the SEL/PUSH EXEC dial to
select (SETUP MENU), then press
the dial.
SETUP MENU STBY
––:––:––
CLOCK SET
USB STREAM
LTR SIZE
LANGUAGE
DEMO MODE
RETURN
[ MENU ] : END
5
Turn the SEL/PUSH EXEC dial to
select [CLOCK SET], then press the
dial.
CLOCK SET STBY
Y M D H M
2004 1 1 0 : 0 0
[ MENU ] : CANCEL
6
Turn the SEL/PUSH EXEC dial to set
[Y] (year), then press the dial.
CLOCK SET
STBY
Y M D H M
2004 1 1 0 : 0 0
[ MENU ] : CANCEL
You can set any year up to the year 2079.
7
Set [M] (month), [D] (day), [H] (hour)
and [M] (minute) in the same way as
was done in step 6, then press the dial.
,continued
17
Getting started