Jensen JWM20 Installation And Owner's Manual page 11

JWM20
Answering a Call
When answering a call using the connected phone, Bluetooth audio playback
will pause. After hanging up from the call, Bluetooth audio will continue on some
phones. It may be necessary to press the play button (22) to resume Bluetooth
audio playback.
Bluetooth Audio (A2DP)
The A2DP music is available for Bluetooth enabled phones when the phone is
connected. To access Bluetooth mode and play songs stored on your phone,
press the BT/USB button (5) to enter the Bluetooth mode.
Selecting Tracks
During playback, press or button (12, 11) to play the previous or next track.
Pausing Playback
During playback, press button (22) to pause the Bluetooth audio playback.
"PAUSE" will appear on the LCD. Press button (22) again to resume
playback. If you change to another mode, playback will automatically pause.
Press the BT/USB button (5) to return to Bluetooth mode and resume audio
playback from your Bluetooth enabled device.
NOTE: If a Bluetooth device is disconnected due to the power being turned
off or if the device goes out of range, the unit will automatically search for
the matching Bluetooth mobile device when the power is restored.
11