Inserting A Cassette - Sony CCD-TRV112 Operating Instructions (primary manual) Operating Instructions Manual

Charging and installing the battery pack
To remove the battery pack
Slide BATT, and then pull the lower part of the battery pack.

Inserting a cassette

Make sure that a power source is installed.
(1) While pressing the small blue button, slide EJECT in the direction of the arrow.
The cassette compartment automatically opens.
(2) Insert a cassette (not supplied) with the window facing out.
(3) Press the PUSH mark on the cassette compartment to close it. The cassette
compartment automatically closes.
EJECT
To eject the cassette
While pressing the small blue button, slide EJECT in the direction of the arrow.
To prevent accidental erasure
Slide the tab on the cassette to expose the red
mark.
If you insert the cassette with the red mark
exposed and close the cassette compartment,
the beeps sound for a while. If you try to
record with the red mark exposed, the
and 6 indicators flash in the viewfinder, and
you cannot record.
To re-record on this tape, slide the tab back out covering the red mark.
8
2
1
L
CCD-TRV12/TRV22/TRV33/TRV112/TRV212 3-859-057-15.E
PUSH