Servicing Information - Panasonic CW-A90VE Service Manual

CW-A90VE / CW-A120VE

10 Servicing Information

10.1. Control Board Removal Procedure
1. Remove the screws in front and both sides of the chassis
as indicated (1), (2) and (3).
2. Release the tabs at both sides of the front grille (push in the
cabinet and pull out the grille).Then, pull up the grille as to
release another two tabs at the top side of the grille.
3. Pull out the knobs from its position (1) & (2) and then take
out the control panel (3). Then, release the temperature
sensor from its holder (4) and pull out the wire from the
bushing at the cabinet (5).
4. Pull out the unit from cabinet by holding the hand grip at the
base pan. Remove two screws in front of the control board
(1) & (2). Then, remove screw at the side of control board
(3) and take out the control board side plate.
5. Hold the horizontal vane and pull it out from the top side
and get it out from its position.
6. Then, remove the shaft at the bottom of the compartment.
14