Remote Update - Miele DGC 7660 Operating And Installation Instructions

Appliance list
All household appliances signed in to
the Miele@home System are shown.
Once you have selected an appliance,
you can access further settings:
– Display this appliance
– On
The SuperVision
pliance is switched on.
– Off
The
SuperVision
pliance is switched off. The appli-
ance is still signed on to the
Miele@home system. Faults are
displayed, even if the
function for the appli-
SuperVision
ance has been switched off.
–
Buzzer tones
You can select whether the buzzers
are switched on (
( Off ) for this appliance.
function for this ap-
function for this ap-
) or switched off
On

Remote Update

The
Remote Update
only displayed and can only be selec-
ted if the requirements for using
Miele@home have been met (see "Be-
fore using for the first time –
Miele@home").
The RemoteUpdate function is used for
updating the software in your steam
oven. If an update is available for your
steam oven, it will automatically down-
load it. Updates will not be installed
automatically. They must be initiated
manually.
If you do not install an update, you can
continue to use your steam oven as
usual. However, Miele recommends in-
stalling updates.
Activating/deactivating
The RemoteUpdate function is activ-
ated as standard. Available updates will
be downloaded automatically but will
only be installed if you initiate installa-
tion manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
Settings
menu option is
53