Miele KM 7678 FR Operating And Installation page 49

Problem
1 and a number
(e.g. 1-0) is flashing al-
ternately with a 3-digit
number in the timer dis-
play.
 flashes alternately
with numbers in the
timer display.
Cause and remedy
Fault in a zone
 Disconnect the power supply to the hob for ap-
prox. 1 minute.
 If the problem persists after power has been re-
stored, please contact Miele Service.

The overheating protection mechanism has been ac-
tivated.
 See "Safety features".
,  or 
The fan is blocked or defective.
 Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
 If this fault code continues to appear in the dis-
play, contact Miele Service.
 and other numbers
There is a fault in the electronic module.
 Interrupt the power supply to the hob for approx.
1 minute.
 If the problem persists after power has been re-
stored, please contact Miele Service.
Problem solving guide
49