Safety Switch-Off - Miele KM 7678 FR Operating And Installation

Safety features

Safety switch-off

Sensor controls are covered
Your hob will turn off automatically if
one or several of the sensors remain
covered for longer than 10 seconds, for
example, by finger contact, food boiling
over or by an object such as an oven
glove or tea towel.  flashes briefly
above the  sensor control and a tone
will sound.
 will go out once you have removed
the object and/or cleaned the hob and
the hob will be ready to use again.
Excessive operating time
The safety shut-off is triggered auto-
matically if a zone is heated for an un-
usually long period of time. This time
depends on the power level selected. If
it has been exceeded, the heat
switches off and the residual heat indic-
ator appears. A power level can be se-
lected in the usual way.
The hob is programmed to safety set-
ting 0 at the factory. If necessary, a
higher safety setting with a shorter
maximum operating time can be set
(see chart).
38
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the num-
ber are only available if the power level
range has been extended (see "Setting
range").
** Factory default setting
Maximum operating time
[h:min]
Safety setting
0** 1
10:00 8:00 5:00
10:00 7:00 4:00
5:00 4:00 3:00
5:00 3:30 2:00
4:00 2:00 1:30
4:00 1:30 1:00
4:00 1:00 0:30
4:00 0:42 0:24
4:00 0:30 0:20
4:00 0:30 0:18
1:00 0:24 0:10
2