Installation And Connections; Installation; Attaching An Output Card; Installing The Camera - Sony BRC-Z330 Operating Instructions Manual

Installation and Connections

Installation

Attaching an Output Card

Attach an Output Card (not supplied) to the card slot on
the rear of the camera.
1
Loosen the two screws to remove the card slot
cover.
2
Insert an optional Output Card into the card slot.
Align both ends of the Output Card with the sliders
inside the slot, then insert the board securely as far
as it will go.
3
Tighten the two screws on the Output Card.
To remove the Output Card
Loosen the two screws on the Output Card and pull the
board out straight and slowly.

Installing the Camera

To install the camera on a desk
Place the camera on a flat surface.
BRBK-HD2
(not supplied)
43
Installation