Operating Multiple Brc-Z330 Cameras Using The Brs-200 Remote Camera Operating Switcher - Sony BRC-Z330 Operating Instructions Manual

Operating Multiple BRC-Z330 Cameras Using the BRS-200 Remote Camera
Operating Switcher
This system allows you:
• Operate up to seven cameras remotely and perform switching, using a single Remote Camera Operating Switcher
• To perform pan/tilt and zoom operations using the joystick
System configuration
BRC-Z330
BRC-Z330
BRC-Z330
Note
To operate a BRC-Z330 with the BRS-200 Remote Camera Operating Switcher, install an optional BRBK-HD2 HD-
SDI Output Card in the BRC-Z330, which cannot be controlled this way without a BRBK-HD2 HD-SDI Output Card
installed.
12
System Configuration
BRBK-HD2
BRBK-HD2
BRBK-HD2
HD video monitor, VTR, etc.
BRS-200 Processor
Control cable
(supplied with the
BRS-200)
BRS-200
REMOTE CAMERA OPERATING SWITCHER
BRS-200 Control Panel
Video signal
Remote control (VISCA) signal
,
Signal flow