Sony BRC-Z330 Operating Instructions Manual page 48

Note
For attaching the camera to the ceiling bracket, use
only the supplied screws. Using other screws may
damage the camera.
3
Attach the supplied wire rope to the ceiling bracket
(A).
Pass the wire rope through the fixing hole and
attach its end to the attachment hole on the bracket
using the supplied one screw (3M4 × 8).
Wire rope (supplied)
Caution
For attaching the wire rope to the bracket, use
only the supplied screw. Using another screw may
disable the function of the wire rope.
48
Installation
3M4 × 8 (supplied)
Fixing hole for wire
rope
Ceiling bracket (A)
4
Attach the ceiling bracket (B) to a shelf, etc. on
which the camera is to be installed.
Use four screws (not supplied) appropriate for the
materials of the shelf, etc.
Align the f hole on the ceiling bracket (B) in the
direction where the front of the camera will be
positioned later.
Wall Screws (4)
f Screw hole
(front of the
camera)
Shelf, etc.
About 70 mm (2 7/8 in.)
diameter hole for
protrusions of the ceiling
bracket
Ceiling
bracket (B)
Hole for
connecting
cables