T.O. BMS1F-16CM-1
3.1.1 MASTER CAUTION light
The light should be reset as soon as possible so that other triggering events may be more noticeable.
Unless it is reset the MASTER CAUTION light will remain illuminated as long as the individual caution
light is illuminated.
3.1.2 Caution lights
3.1.3 Warning lights
BMS 4.34 Dash 1
© Red Dog 2012-2019
The MASTER CAUTION light illuminates shortly after any individual light on
the Caution Panel illuminates. It does not illuminate in conjunction with the
warning lights.
The MASTER CAUTION light can be reset by pressing it, unless the
triggering caution light is the ELEC SYS light.
BMS 4.34 Change 2.00
The caution light panel is located
on the right auxiliary console. It
is a placeholder for 32
indicators, of which 20 are fully
supported in BMS.
The ELEC SYS caution light
cannot be reset with the
MASTER CAUTION light. The
only way to reset it is to use the
ELEC CAUTION RESET push
button on the ELEC panel. The
light may not be resettable in
some situations.
Some lights such as the
AVIONICS FAULT, ENGINE
FAULT and FLCS FAULT may
be reset with the F-ACK button
(PFLD message).
The warning lights are located on
the eyebrows, just under the
glareshields.
Page: 188
Need help?
Do you have a question about the F-16C/D 4.34 and is the answer not in the manual?