Table of Contents
Advertisement
Available languages
Available languages
Digital Anglefinder
Article number
"HOLD" function
Display Illumination
"Simple Miter" Operating Mode
"Compound Miter" Operating
Mode
Measuring range
Measuring accuracy angle
Lowest indication unit
Operating temperature
Storage temperature
Alkaline Batteries
Operating time approx.
Automatic switch-off after
approx.
Leg length
Weight according to EPTA-
Procedure 01/2003
Dimensions
(length x width x height)
IP 54 (dust and splash proof)
The anglefinder can be clearly identified with the serial
number 10 on the type plate.
The anglefinder is intended for measuring and transfer-
ring angles and for calculating simple and compound mi-
ter angles. It is suitable for indoor and outdoor use.
The numbering of the product features shown refers to
the illustration of the anglefinder on the graphic page.
1 Fold-out leg
2 Viewing window for dis-
play
3 Locking knob
4 Base leg
5 Battery lid
6 Latch of battery lid
7 Display
8 Spirit level for horizon-
tal alignment
9 Spirit level for vertical
alignment
The numbering of the product features shown refers to
the illustration of the anglefinder on the graphic page.
a "H" indicator for "HOLD" memory value
b Battery indicator
c Reading
d Bevel angle indicator "BVL"
e Miter angle indicator "MTR"
f
Corner angle indicator "CNR"
g Spring angle indicator "SPR"
6
Technical Data
Intended Use
Features
Display elements
GAM 220 MF
3 601 K76 610
0°...220°
±0.1°
0.1°
14 °F...122 °F / –10 °C...+50 °C
–4 °F...158 °F / –20 °C...+70 °C
4 x1.5V LR6 (AA)
80 h
30 min
15.75in / 400 mm
2.4 lbs / 1.1 kg
17.6 x 2 x 2.4 in /
447 x 52 x 60 mm
10 Serial number
11 "HOLD" button
12 "ON/OFF" button
13 Button for rotating the
display
14 "MTR1" button for sim-
ple miter
15 "MTR2"
compound miter
16 Protective pouch
17 Leg extension
●
●
●
●
●
button
for
Advertisement
Table of Contents
