Download Print this page

Whirlpool XWT-608 Instruction Manual page 4

Whitemagic washer

Advertisement

DRAIN
1.After the washing is completed, remove the
clothes from the Wash Tub and place it in the
Spin Tub.
2.If you wish to wash other clothes in the same
soapy water, you may do so. If not, turn the
Drain Selector to drain.
3.The soapy water will then be drained from the
Tub.
4.When all the water has been drained from the
Wash Tub, turn the Drain Selector to "Normal".
RINSE
After washing, it is best to first extract the soapy
wash water from the Wash Tub to obtain best
result of rinsing.
1.Place the clothes into the Spin Tub and
arrange them evenly.
2.Press the clothes gently into the Tub and place
the safety Cover so that it completely covers
the clothes (see illustration below).
3.Close spin tub cover of the Spin Tub.
4.Turn the Spin Timer to approximately 2
minutes.
5.Remove the clothes from the Spin Tub and
place it back to the empty Wash Tub.
6.Open the Tap and fill the Wash Tub with water
to a level of approximately 3 cm below the
Water Level Mark and then close the Tap.
7.Turn the Wash Selector to Normal .
8. Turn the Wash Timer to the required time.
9. After rinsing, turn the Drain Selector to Drain.
10. When all the water has been drained off ,turn
the Drain Selector to "NormaL" .
NOTE : You may repeat steps 6 to 10 if necessary.
SPIN
1.Transfer the clothes from the Wash Tub to the
Spin Tub and arrange them evenly.
2.Smaller items should be placed in first.
3.Press the clothes firmly towards the bottom of
the tub.
4.Place the safety Cover on the clothes (Please
see Illustration below) .
5.Close spin Tub Cover.
6.Turn the Spin Timer to the desired time (refer to
the table below).
SPIN TIME TABLE
TYPE OF
MODE
FABRIC
Delicate Fabrics
Synthetics
White Fabrics
Cotton-Linen
Heavy Fabrics
Cotton
3
SPINNING
TIME
1 min.
2 - 4 mins.
3 - 5 mins.

Advertisement

loading