General Operation; Setting Sleep; Setting Alarm - Pinell Supersound 301 Instruction Manual

General Operation

Setting Sleep

This feature enables your radio to switch to standby mode by itself after a set sleep time.
1. Press MENU button - Main menu - Sleep, and then press SCROLL knob to confirm.
2. Turn SCROLL knob to select a sleep time, and then press SCROLL knob to confirm. The
sleep icon and sleep time will show on the display.
The sleep time options: Sleep OFF/15/30/45/60 MINS,
3. To turn the sleep function off while the sleep timer is still counting down, select "Sleep"
option, turn SCROLL knob to select "Sleep OFF".

Setting Alarm

Your radio includes dual alarms. Set Alarm, making sure set time at first.
1. Press MENU button - Main menu - Alarms, and then press SCROLL knob to confirm.
2. Turn SCROLL knob to select "Alarm 1" or "Alarm 2", and then press SCROLL knob to
confirm.
3. Turn SCROLL knob to select options, and then press SCROLL knob to confirm the setting.
Enable:
Time:
Mode:
Preset:
Volume:
Save:
4. When the display shows "Alarm Saved", the alarm setting is successful.
on the display.
To temporarily switch off alarm, press SCROLL knob repeatedly to set snooze time for 5,
5.
10, 15 or 30 minutes in turn. The unit will go to standby and snooze time will show on the
display.
6. To turn off alarm, press
7. To cancel Alarm, refer to steps1-3 to enable alarm "Off".
display
Alarm active day: Off, Daily, Once, Weekends or Weekdays
Alarm time: 00:00 (manually set up the time )
Alarm mode: Buzz, Internet radio, DAB or FM
(If the wake-up mode is DAB and the DAB signal strength is low, the
buzzer alarm will be triggered.)
Last listened or saved preset station (not available for Buzz mode).
Alarm volume
Save the alarm
button when the alarm sounds.
or will show
or will disappear from
35