Pinell Supersound 301 Instruction Manual page 10

Using Headphones
You will require headphones fitted with a 3.5 mm diameter stereo plug. The Headphones socket
is located at the rear of unit. Headphones are not supplied with this radio.
Turn down the volume before connecting headphones. Slowly raise the volume with the
headphones on until you reach your desired level.
Caution: long-term exposure to loud music may cause hearing damage. It is best to avoid
extreme volume when using headphones, especially for extended periods of time.
Wireless LAN Setting
A broadband Internet connection.

A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.

If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi

Protected Access (WPA) data encryption then you need to know the WEP or WPA code so
you can get the radio to communicate with the network.
If your wireless network is configured for trusted stations you will need to enter the Radio's

MAC address into your wireless access point. To find the Radio's MAC address use menu
items as follows: Main menu - System settings - Network - View settings - MAC address.
Before you continue, make sure that your wireless access point is powered up and connected to
your broadband Internet. To get this part of the system working, read the instruction supplied with
the wireless access point is highly recommended.
10