Cleaning And Maintenance - Remington iCoffee Davinci Customer Care Manual

Taste | Innovation | Technology

CLEANING AND MAINTENANCE

Cleaning the Brewer's External Surfaces:
Use a soapy, damp, non-abrasive cloth to clean the brewer's external surface. NEVER
immerse the brewer in water or other liquids.
The DRIP TRAY and DRIP TRAY COVER are completely dishwasher safe if washed at a low
water temperature in the upper rack; or, you can wash them by hand with a mild detergent.
Cleaning the WATER RESERVOIR, UPPER/LOWER JAWS AND BREWING CHAMBER:
Release the UPPER JAW, remove the SINGLE SERVE CUP HOLDER and wash by hand. The
WATER RESERVOIR and lid should also be washed by hand. Wipe down the UPPER and
LOWER JAW surfaces with a damp non-abrasive cloth, being careful of the needle in the
SINGLE SERVE CUP HOLDER.
UNDERSTANDING AND USING THE ENERY SAVER FEATURE
To help you conserve energy, your brewer has 2 ENERGY SAVING FEATURES, one is
automatic and the other is self initiated. Note the following:
A. AUTOMATIC ENERGY SAVING FEATURE:
Your brewer automatically enters an energy saving mode after 2 hours of non-use
and will remain in that mode for up to 26 hours. While in the Energy Saving mode,
the brewer remains on but the HOT WATER TANK HOLDING TEMPERATURE will be
reduced. After 28 hours of non-use, the brewer automatically shuts-off. If your
brewer has shut off, due to non-use, merely press the 'POWER' button to turn your
brewer back on.
B. SELF-INITIATED ENERGY SAVER:
If you would like the brewer to automatically turn off after 2 hours of non-use,
simply press the 'ENERGY SAVER BUTTON' . When pushed, the ENERGY SAVER
BUTTON will illuminate and the brewer will automatically shut-off after 2 hours of
non-use.
NOTE: If you change your mind and don't want the brewer to turn off after 2 hours of non-
use, merely press the ENERGY SAVER BUTTON to turn off the feature... and you guessed it,
the ENERGY SAVER BUTTON will no longer be illuminated.
8
TM