De-Scaling Your Brewer - Remington iCoffee Davinci Customer Care Manual

DE-SCALING YOUR BREWER:

Over time, water mineral deposits may build up in your Brewer. Although non-toxic, these
deposits can hinder the brewer's performance. Therefore, we recommend that you de-scale
the brewer every 4 to 6 months. If you live in an area with high mineral content in the
water supply, you may want to complete this procedure more often. Do the following:
1. Empty the water out of the WATER RESERVOIR per normal procedures.
2. Fill the WATER RESERVOIR 1/3 full with household white vinegar, then to the MAX FILL
LINE with water. Put the reservoir back onto the brewer and replace its lid.
3. Press the "OPEN" ICON to release the UPPER JAW, then lower it back to its original position.
4. Place a 12 ounce or larger cup size on the DRIP TRAY.
5. Press the 12 oz CUP SIZE BUTTON.
6. Press the BREW button to begin the de-scaling process.
7. Discard the dispensed de-scaling solution from your cup and repeat steps 3 through 6
above until all the solution has been processed through the brewer and dispensed into
your cup.
8. Allow the brewer to sit for at least 4 hours to dissolve all the mineral content.
9. After 4 hours, remove the WATER RESERVOIR from the brewer and wash thoroughly.
10. Fill the WATER RESERVOIR with fresh water to the MAX FILL LINE and return to brewer
along with its lid.
11. Complete steps 3 through 7 above, until all the water has been dispensed through the
brewer and the "ADD WATER" light is illuminated.
12. The brewer is now ready to make your favorite beverage.
9