Cleaning And Maintenance; Cleaning The Brewer’s External Surfaces; Cleaning The Brewer’s Upper/Lower Jaw Area; Cleaning The Brewer’s Single Serve Cup Holder - Remington iCoffee EXPRESS Customer Care Manual

Taste | Innovation |

CLEANING AND MAINTENANCE

Cleaning the Brewer's EXTERNAL SURFACES:
• Use a soapy, damp, non-abrasive cloth to clean the brewer's external surface.
NEVER immerse the brewer in water or other liquids.
• The DRIP TRAY and DRIP TRAY COVER are completely dishwasher safe if washed at
a low water temperature in the upper rack. You can also wash them by hand with a
mild detergent.
Cleaning the Brewer's UPPER/LOWER JAW AREA:
• Release the UPPER BREW JAW, remove the SINGLE SERVE CUP HOLDER by pulling it up
from the LOWER BREW JAW area and set aside. Wipe down the UPPER and LOWER BREW
JAW surfaces with a damp non-abrasive cloth, being careful of the needle in the SINGLE
SERVE CUP HOLDER.
Cleaning the Brewer's SINGLE SERVE CUP HOLDER:
• Disassemble the single serve cup holder by unsnapping the upper portion from
the lower.
• Wash by hand with mild detergent and rinse thoroughly.
• Reassemble the Single Serve Cup Holder by snapping the two pieces back together.
• Return the holder back to its original position inside the LOWER BREW JAW area.
8
Technology
TM