Memory Functions - Knight ILCS Installation & Programming Manual

*** DISPENSER
1

MEMORY FUNCTIONS

CLEAR SUM/BATCH REPORT ?
PRESS: YES OR NO
N O Y E S
CLEARING ALL SUM/BATCH
INFORMATION
CLEAR BATCH COUNT ?
PRESS: YES OR NO
N O Y E S
CLEARING BATCH COUNT
LOAD FACTORY DEFAULTS ?
PRESS: YES OR NO
N O Y E S
ARE YOU SURE ?
PRESS: YES OR NO
N O Y E S
LOADING FACTORY DEFAULTS
MEMORY FUNCTIONS MENU HEADING
0901112 Rev: REL (08/03)
***
This menu selection is used to clear the summary and batch
tracking report memory. Press YES to begin clearing, or press NO
to move on to the next menu selection without clearing.
This menu selection is used to zero out the batch count (the digital
counter that appears when pressing the BATCH COUNT button
on the control panel). Press YES to begin clearing, or press NO to
move on to the next menu selection without clearing.
This menu selection is used to clear and reset programming
parameters such as unit of measure, system operating time, user
passwords, user names, formula access, truck numbers, chemical
names,
maintenance schedule dates.
Press YES to begin loading factory defaults or press NO to move
on to the next menu selection without loading factory defaults.
*** PLEASE STAND BY ***
•
Clear sum/batch report
•
Clear batch count
•
Load factory defaults
This message indicates that the clearing process is
active. When the process is complete, the next menu
item will appear.
This message indicates that the clearing process is
active. When the process is complete, the next menu
item will appear.
product costs, shift times,
You are then asked if you really do want to use this
command. Press YES if you are sure, or press NO to
move on to the next menu selection without loading.
This message indicates that the clearing
process is active (factory defaults are being
loaded at this point). When the process is
complete, the menu heading will appear.
operating zone, and
Page 9 of 20