Knight ILCS Installation & Programming Manual page 11

*** DISPENSER
2
SETUP ROUTINES
SET DATE & TIME ?
PRESS: YES OR NO
N O Y E S
HOUR 00
MONTH 00
UNIT OF MEASURE = US
1=US 2=METRIC 3=IMPERIAL
SYSTEM OPERATING TIME
= 60 MINUTES
SETUP ROUTINES MENU HEADING
0901112 Rev: REL (08/03)
***
This menu selection allows you to set the time and date. Press
YES to invoke the command, or press NO to move on to the next
menu selection.
MINUTE 00
DAY 00 YR 00
This menu selection allows you to change the unit of measure.
Use the number buttons to choose the desired unit of measure.
Press the MENU
The system operating time is the maximum length of time that the
system can be operated after a user enters their password and
presses the START button.
Use SCROLL and the number keys to set the system operating
time, then press ENTER. Press the MENU
to the menu heading.
•
Continued
Use the number buttons to set date and time in military
format (i.e. 13:00 = 1:00 PM) then press ENTER. Press
the MENU button to move on to the next menu
selection.
button to move on to the next menu selection.
button to return back
Page 11 of 20