Shimano SM-PCE1 Help Manual page 5

The main functions are as follows.
When using SM-PCE1
Functions
Connection check
Customize
Error check
Update firmware
Preset
Unit log acquisition
(only for E-BIKE
category)
Complete Setup
When using SM-BCR2
Functions
Connection check
Customize
Update firmware
Preset
Complete Setup
Details
The function is to check that each unit is connected correctly and is recognized by PC.
This function allows you to customize the global functions and operations of
the system to suit your needs.
When a single unit or multiple units are connected, this function checks
their operation and identifies any units which have a problem.
However, this does not mean that all such problems can be discovered. In
addition, the function does not fix any problems which are discovered.
This function is used to update the firmware for each unit.
(The firmware is downloaded via the Internet.）
This function allows you to connect one or more units and read or write all the
settings of those units at a time. The readout settings can be saved in a file.
The settings can also be successively written to multiple bicycles.
Acquires various kinds of data from the units and display it in a report
format. In the report, you can check the settings of each unit and the
battery status.
Disconnect the unit from the computer. The unit may not operate properly
before this operation is completed. Even when E-TUBE PROJECT is exited,
the connection to the PC is disconnected.
Details
The function is to check that each unit is connected correctly and is
recognized by PC.
This function allows you to customize the global functions and operations of
the system to suit your needs.
This function is used to update the firmware for each unit.
(The firmware is downloaded via the Internet.）
This function allows you to connect one or more units and read or write all the
settings of those units at a time. The readout settings can be saved in a file.
The settings can also be successively written to multiple bicycles.
Disconnect the unit from the computer. The unit may not operate properly
before this operation is completed. Even when E-TUBE PROJECT is exited,
the connection to the PC is disconnected.
5 / 32
ABOUT E-TUBE PROJECT