Shimano SM-PCE1 Help Manual page 15

Help
 Manual help
This displays the E-TUBE PROJECT manual (this document).
 E-TUBE PROJECT latest version check
This function checks whether an updated version of E-TUBE PROJECT is available for downloading.
When a new version is available, the following screen will be displayed. When [Yes] is selected, the
latest version of E-TUBE PROJECT will be downloaded. After that, follow the on-screen instructions to
carry out the upgrade.
The PC needs to be connected to the Internet for this check to be carried out.
*
If your E-TUBE PROJECT is the latest version, check whether a new version of the firmware of each
component has been released. When a new version is available, it will be automatically downloaded.
When there is no firmware that can be downloaded, the message will be displayed.
*
The firmware files which have been downloaded will be stored in the following folders.
Firmware can be updated even on a PC that is not connected to the Internet by copying the firmware
files.
These folders are created automatically when the E-TUBE PROJECT is installed.
These folders are hidden. To display them, the Windows settings need to be changed.
Version
Windows 7
Windows 8
Windows 10
Never attempt to change the contents of the firmware files or the filenames. If you do
*
this, it will not be possible to update the firmware correctly, and problems may occur
with the units after carrying out firmware updates.
Save destination
C:¥ProgramData¥E-tube Project¥FW
C:¥ProgramData¥E-tube Project¥FW
C:¥ProgramData¥E-tube Project¥FW
ABOUT THE E-TUBE PROJECT OPERATION SCREENS
15 / 32