Introduction - Shimano SM-PCE1 Help Manual

INTRODUCTION

This operating manual contains instructions for operating E-TUBE PROJECT.
In order to fully utilize the functions of E-TUBE PROJECT, please read this manual thoroughly before
use.
Note
Once a connection check is started, never connect or disconnect the battery or unit before the

completion of the operation or E-TUBE PROJECT. If this is not observed, it may damage the
SM-PCE1 / SM-BCR2 or the other units.
Never attempt to change the contents of the firmware files or the filenames. If you do this, it will

not be possible to update the firmware correctly, and problems may occur with the units after
carrying out firmware updates.
 NOTE
When connecting the SM-PCE1 / SM-BCR2 to the PC, connect it directly to the USB port of the PC,

without using an intermediate device such as a USB hub.
Make sure that the PC does not switch into standby while you are carrying out operations such as

updating the firmware.
If the PC switches to standby, E-TUBE PROJECT processing will be interrupted and the screen
display will return to the main menu screen.
3 / 32
INTRODUCTION