Resetting Jobs (Welding Tasks) To The Factory Settings; Resetting A Single Job; Resetting All Jobs - EWM LP-XQ Operating Instructions Manual

6.4

Resetting JOBs (welding tasks) to the factory settings

All customised welding parameters that are stored will be replaced by the factory settings.
6.4.1

Resetting a single JOB

6.4.2

Resetting all JOBs

JOBs 1–128 and 170–256 will be reset.
Custom JOBs 129–169 are maintained.
099-00LPXQ-EW501
13.03.2018
Resetting JOBs (welding tasks) to the factory settings
Figure 6-1
Figure 6-2
Rectifying faults
61